FLAT-1 | 1X Slackline Wall Plate

Flat-1: Slackline Wall Plate

The Flat-1 is one of SLACKTIVITY’s Wall Mount Systems that allows to setup slacklines in indoor spaces, regardless the existence of trees or pillars. The slackline wall plate, that can be fixed to concrete walls, was designed and developed to be as discrete and safe as possible, to suit better the needs and requirements of schools and gyms.

Once the installation plate is done for good, setting up a slackline with this system becomes as simple as it gets. The connection loop, permanently fixed on the plate, allows the attachment of a shackle or a carabiner that, in its turn, connects to ratchet or a slackline webbing loop. This type of connection prevents abrasion caused by metal-to-metal friction and adds to the setup lifespan and safety.

Content:

• 1 x flat slackline wall plate
• 1 x high-strength connection loop
• 1 x twist lock steel carabiner “silver”
• 2 x Mungo steel bolts with protective caps

Flat-1: Stainless steel version

The high-quality wall bracket FLAT-1 made of stainless steel is just 15mm thick and designed for mounting on concrete walls. They were originally developed for use in sports halls, where as little as possible should protrude from the walls. This model made of completely rustproof stainless steel is suitable for indoor and outdoor use.

Content

• 1 x flat slackline wall plate made of stainless steel
• 1 x high-strength connection loop
• 1 x twist lock steel carabiner “silver”
• 2 x Mungo steel bolts with protective caps

Flat on only includes one wall plate. If two anchor points are needed you should order to FLAT-1 or, instead, the FLAT-1 Dual | Complete Slackline Wall Anchor Set, that includes two plates, as well as the slackline.

Slackline Wall Plate Installation

• The installation of the wall mounts is very simple and can be done by anyone who can handle a drill and a hammer.
• Installation can only be done in a proper concrete wall.
• Before proceeding with the installation, read and strictly follow the manual instructions and recommendations. If you have any doubts or questions regarding it, do not hesitate to contact us.

What defines SLACKTIVITY wall mountsEasy to rig offThanks to the high-strength connection loop anything can be conneted in seconds.

All SLACKTIVITY’s Wall Mount Systems, the FLAT-1, the FLAT-1 Dual and the FLAT-2 are made in Swiss SMEs.